H-Type Automatic Cage

This type of cage uses a system for distributing feed that evenly distributes feed along each row. This ensures that all the necessary food is available to the hens. The hen feeders are designed to prevent feed waste and overconsumption. Feed distribution is adjustable via two adjustment screws, allowing flexible control over the feed amount. This ensures that all hens receive an equal amount of high-quality feed.

Layer watering lines (nipple drinkers) are installed in the center of the cells to allow easy access for Layers from both sides. Each cage cell has three 180-degree nipples for the chickens. The combination of watering lines with a V-shaped trough beneath them prevents water spillage onto the manure belt below the cage.

Manure conveyor belts are equipped with powerful drive motors (gearboxes) sized appropriately for each cage row length, and special pressure rollers for efficient manure transport. The drive system is designed to convey manure over 100 meters. The manure belts are equipped with a stainless steel scrubber for cleaning.

The egg conveyor belt runs parallel to the bottom edge and opposite the cage cells. Eggs are gently conveyed at a low speed from a 7-degree inclined surface onto the collection belts, preventing accumulation at any point. Eggs are transferred directly from the conveyor belts onto the roller chain of the cross conveyor. The conveyor belt is precisely synchronized using accurate microswitches and pulled by a braked motor in the main lifting column, positioned at each cage row.